| 详细内容： |
概述:
随着科学技术的发展,工业企业中非线性用电设备的种类和数量迅速增加。这些用电设备在运行时会产生大量谐波,从而导致系统损耗增加,严整威胁设备的正常运行。因此消除谐波”污染”问题已经成为国际性的重大研究课题 。
TSF动态谐波滤波器根据负荷谐波的大小利用可控硅自动投切谐波滤波器,能够实现对非线性负荷进行动态滤除谐波和动态补偿无功功率。该技术填补了国内空白,具有国际先进水平.
主要谐波负荷:
◆变频器 , 软启动装置
◆电弧炉 , 硅整流装置
◆电气化铁路
◆节能灯 , 家用电器
◆焊机
谐波的危害:
◆降低发电,输电及用电设备的效率
◆威胁电器设备的正常运行
◆起电网局部的并联谐振和串联谐振
◆致无功补偿电容器过负荷
◆致继电保护和自动装置的误动作
◆扰通讯系统
◆起数控设备数据丢失及模块烧毁
TSF动态谐波滤波器的基本原理:
通常谐波电流大小与谐波源设备的工作电流成正比。TSF动态谐波滤波器,由控制器测量出负荷谐波电流,控制双向可控硅过零触发,在投切过程中无冲击,无涌流,无过渡过程。在动态滤波的同时也动态补偿无功功率。
另外,TSF+TSC可以组成动态谐波,无功功率综合补偿器,适合于负荷谐波含量大,功率因数低,负荷波动大的场合,可有效的实现动态谐波抑制和无功补偿,是谐波抑制和无功补偿领域的重要创新。
技术参数:
◆额定电压 :380V
◆额定频率 :50(60)HZ
◆基本滤波器 :3th,5th ， 7th,11th
◆防护等级 :IP30
订货须知:
◆提供必要原始数据（或实测值）和所需无功补偿容量
◆柜体型号颜色
◆其他特殊要求
TSF Dynamic Harmonic Filters
INTRODUCTION：
With the development of science and technology, the variety and quality of non-linear electric facilities in industrial enterprises are increasing rapidly. These facilities produces large amount of harmonic at working, which increases the system loss and damage of the system. So how to eliminate this harmonic pollution has become an important international subject.
TSF-dynamic harmonic filters adopt the SCR auto-switch harmonic filters cooperating with the harmonic load, filtrate dynamic harmonic waveform and compensate dynamically the reactive power. This technique fills the national gap, has internationally advanced level.。
MAIN HAMONIC SOURCES：
◆Frequency converter, soft switch device
◆Arc stove, SCR rectification device
◆Electrified railway
◆Economic light, housekeeping appliance
◆Welding machine
HARMONIC HARM：
◆Reduce power generating, transmitting, and efficiency of the equipments
◆Threat the electrification equipment regular working
◆Cause local series and parallel resonance at the power grids
◆Cause the reactive compensating capacitor over-load
◆Cause the relay safeguard and automatic equipment error
◆Disturb the communicating system
◆Cause data loss and model burning down in the data controlling equipments
BASIC THEORY OF TSF DYNAMIC HARMONIC FILTERS：
Usually the harmonic current is proportional to the working current of the harmonic sources. TSF-dynamic harmonic filter measures the load harmonic currents through the controller and makes the bi-directional triode thyristor trigger at zero without shock, fluctuating current, and transitional process in the actuation process.
Additionally, TSF+TSC can consist into dynamic harmonic, reactive power multi-compensator, suitable to high-harmonic loads, low power factor and high fluctuating loads. It can effectively eliminate the dynamic harmonic and compensate the reactive power. TSF+TSC is an important innovation in the field of harmonic eliminating and reactive power compensating.
TECHNIQUE PARAMETERS：
◆Rated voltage: 380V
◆Rated frequency: 50(60)HZ
◆Basic filter: 3th,5th,7th,11th
◆Protective level: IP30
ORDERING NOTICE：
◆Provide essential original data (or data measured) and the reactive power capability needed
◆The type and color of the cupboard
◆Other specific demands
Notice: If needing various harmonic times, voltage level and capacity filter, can inquire to our tech-employees directly.
|
|
中国电子商务服务联盟成员单位 琼ICP备